Tech. Reports

Technical Reports

These reports come from a variety of activities, such as undergraduate or graduate independent studies, early doctoral or post-doctoral work. They are not meant to be "archival" but they often contain useful information that is not included in eventual archival publications in the open literature

Zawislak, M. R., "Design Optimization Model for a Schmidt-Cassegrain Telescope", ME590 Project Report (Advised by Papalambros, P.), University of Michigan, Ann Arbor, December, 2006.

Maheut, P., "Capturing Aesthetic Preference in Product Design", M.S. Thesis, DPSI/DIMI, Centrale Nantes, France - University of Michigan, USA, 2006.

Franklin, C., "Climbing Anchor Analysis Project Report", ME490 Project Report (Advised by Papalambros, P.), University of Michigan, 2006.

Lesueur, T., "Comparative Study of Series and Parallel Hybrid Vehicles", Tech Report, ESTACA Ecole D'Enfenieurs - University of Michigan, 2000.

Georgiopoulos, P., "Modeling & Delveopment of a Hydrostatic Hybrid Vehicle", ME503 Project Report (Advised by Papalambros, P.), Program in Manufacturing, the University of Michigan , 1999.

Yoon, E. I., "Automated Flexible Fixturing System: Just An Automactic Work Station", ME490 Project Report (Advised by Papalambros, P.), University of Michigan, Ann Arbor, April, 1998.

Rao, J. and Papalambros, P., "A Case for Input Output Modeling Formulations in Optimal Design", Tech Report, University of Michigan, Ann Arbor, April, 1998.

Rao, J., "Optimal Design Formulations in Preliminary Design of Unconventional Vehicle Systems", Tech Report, University of Michigan, Ann Arbor, November, 1998.

Haubert, T., "A Feasibility Study on Robotic Flexible Fixturing Systems: The Wammer Jammer System", ME490 Project Report (Advised by Papalambros, P.), University of Michigan, Ann Arbor, April, 1998.

Ginnebaugh, F., "Simultaneous Optimization of a Mechanism and its Controller", ME490 Project Report (Advised by Reyer, J. and Papalambros, P.), University of Michigan, Ann Arbor, December, 1998.

Wagner, T. C. and Papalambros, P. Y., "Defining Properties for Decomposition in Nonlinear Programming", UM-MEAM-97-04, University of Michigan, Ann Arbor, 1997.

Wagner, T. C. and Papalambros, P. Y., "Decomposition Analysis of an Automotive Powertrain Design Problem: Model Development, Partitioning, and Optimization", UM-MEAM-96-18, University of Michigan, Ann Arbor, 1996.

Krishnamachari, R. S., "Design Model of a Vacuum-Assisted Hydraulic Braking System", UM-MEAM-96-12, University of Michigan, Ann Arbor, October, 1996.

Athan, T. W. and Papalambros, P. Y., "Multicriteria Optimization for the Regulation of Vehicle Anti-lock Brake Systems", UM-MEAM-95-10, University of Michigan, Ann Arbor, 1995.

Wagner, T. C. and Papalambros, P. Y., "Optimal Engine Design Using Nonlinear Programming and the Engine System Assessment Model", UM-MEAM-92-00, University of Michigan, Ann Arbor, 1992.

Snavey, G. and Papalambros, P., "The ABCON and H-ABCON Source Code", UM-MEAM-92-04, University of Michigan, Ann Arbor, 1992.

Linder, B., "Automating Welded Gusset Plate Connections in Planar Truss Structures", Tech Report, University of Michigan, Ann Arbor, September, 1991.Source code (Think Pascal) .

Lo, C., "Preliminary Optimal Design for Electric Hybrid Vehicle Systems", Tech Report, University of Michigan, Ann Arbor, August, 1990.

Szpak, P., "PRIMA.1 (Production Rule-based Implicit Elimination in Monotonicity Analysis)", Tech Report, University of Michigan, Ann Arbor, 1989.

Papadakis, N. A. and Papalambros, P., "A New Merit Function for Variable Metric Constrained Optimization", UM-MEAM-89-02, University of Michigan, Ann Arbor, 1989.Computer program Fortran source code .

Papadakis, N. A. and Papalambros, P., "Essentially Quadratic Penalty Functions and the Maratos Effect", UM-MEAM-89-06, University of Michigan, Ann Arbor, 1989.Computer program Fortran source code .

Szobocsan, J. J., "Flange Coupling Synthesis on AutoCAD", ME600 Project Report (Advised by Papalambros, P.), University of Michigan, Ann Arbor, April, 1988.

Papalambros, P., "Enhancements in Design Optimization Problem Solving: A Knowledge - Based Approach ", TKHS-88.79, SAAB-Scania Aircraft Division, Link�ping, Sweden, Jul. 1988.

Jakiela, M. and Papalambros, P., "A Framework for Suggestive CAD Systems", University of Michigan, Ann Arbor, April, 1988.

Hewko, M. D., "A Feasibility Study on Robotic Flexible Fixturing Systems: Automated Flexible Modular Fixturing (AFMF)", ME490 Project Report (Advised by Papalambros, P.), University of Michigan, Ann Arbor, April, 1988.

Liu, J. and Papalambros, P., "A Note on Maximizing the Static Stiffness of Machine Tool Spindles", University of Michigan, Ann Arbor, September, 1985.

Rahn, C. D. and Poston, D. I., "Design for Assembly: Robotic Case Study", UM-MEAM-84-28, University of Michigan, Ann Arbor, 1984.

Mourelatos, Z. and Papalambros, P., "A Mathematical Model for Optimal Strength and Alignment of a Marine Shafting System", UM-MEAM-84-25, University of Michigan, Ann Arbor, 1984.

Jakiela, M., Papalambros, P., and Ulsoy, A. G., "Programming Optimal Suggestions in the Design Concept Phase: Application to the Boothroyd Assembly Charts", UM-MEAM-84-23, University of Michigan, Ann Arbor, 1984.

Azarm, S. and Papalambros, P., "Numerical Test Results for A Prototype Local Monotonicity Strategy", UM-MEAM-84-27, University of Michigan, Ann Arbor, 1984.

Anastassopoulos, S., "Engine Design for Maximum Brake Horsepower", ME600 Project Report (Advised by Papalambros, P.), University of Michigan, Ann Arbor, April, 1984.

Papalambros, P., "Autonomous Learning or 'Must We Find A Solution? Can't We Enjoy the Problem for A While?", BUL. No. 1, Univ. of Michigan College of Engineering, Ann Arbor, Feb. 10, 1983, pp. 5-7.

Jakiela, M., "Current Research in Product Design for Automated Assembly", UM-MEAM-83-16, University of Michigan, Ann Arbor, 1983.

Borchelt, J. E., Ulsoy, A. G., and Papalambros, P., "Development of an Efficient Computational Procedure for Evaluating Band Saw Blade Stresses", UM-MEAM-83-13, University of Michigan, Ann Arbor, 1983.

Azarm, S. and Papalambros, P., "Local Monotonicity Analysis", Presented at the Symposium on "Optimization and Its Engineering Uses" TIMS/ORSA Joint National Meeting, Chicago, April 25-27, 1983.

Guo, K.-H., "Statistical Analysis of Vehicle Vibration and Dynamic Load, and Selection of Suspension Design Parameters", UM-MEAM-82-15, University of Michigan, Ann Arbor, 1982.

Azarm, S. and Papalambros, P., "An Interactive Design Procedure for Optimization of Helical Compression Springs", UM-MEAM-82-7, University of Michigan, Ann Arbor, 1982.

Papalambros, P. and Suryanarayana, M. B., "Monotonicity in Mathematical Programming", UM-MEAM-81-1, University of Michigan, Ann Arbor, 1981.

Clauss, D. B. and Papalambros, P., "Minimization of Closure Time for a Fast Action Switch", UM-MEAM-81-3, University of Michigan, Ann Arbor, 1981.